Welcome to the Biomass conversion technologies database which you can access underneath! 

Through the underneath table users can access the database on lignocellulosic biomass conversion technologies characteristics (click on the number in last column). The data included in this database are feeding the Bio2Match, the BeWhere and the LocaGIStics tools all accessible via the main menu in this toolset under 'Tools'. accessible under the ‘Tool'  tab in the main menu above. In the process of creating the database it was ensured to take up the technologies relevant for producing the products described in the product market combinations in WP7 and that were the basis for assessing 2020 and 2030 biomass demand and consumption levels (see Tab 'General data' ---> 'Biomass demand'. For heat, power and fuels, several technologies are available in the database, while for other bio-based products (especially through the sugar platform) some but fewer conversion technologies are included. This is a representation of the technology readiness levels and the current and expected market situation for these products.

In the underneath table an overview is provided of all technologies included in the conversion technologies database. To access the detailed technology characterisation sheets in de database click on the technology number in the last column of the table.  To return to the overview table again click on the return arrow

The technologies covered can be classified in 6 main categories: treatment in subcritical water, syngas platform, gasification technologies, fast pyrolysis, direct combustion of solid biomass, chemical pretreatment, biochemical hydrolisis and fermentation and anearobic digestion. For a further description of the biomass conversion technologies database please consult D2.3The method developed in S2BIOM for minimal biomass quality requirement for each biomass conversion technology is described in D2.1 and  D2.2.

Conversion technologies Conversion technologies

Back

View details of Producer gas to biomethane

GENERAL PROPERTIES
Name Producer gas to biomethane
Main category Syngas platform
Subcategory Indirect gasification for SNG production
Image url
Year of first implementation 2014
Estimated number of systems in operation 0
Main operating principle:
Producer gas production: The gasification section consists of two fluidized-bed reactors: gasifier and combustor. Biomass is fed into gasification chamber, and converted to nitrogen-free fuel gas (producer gas) and char using steam. The char is burnt in air in the combustion chamber, heating bed particles, bed material is fed back into the gasification chamber providing heat for gasification reactions. Producer gas is cooled and filtered and tars are removed in an oil scrubber. Partially cleaned gas is led into final gas cleaning and conditioning unit after which it is pressurised and led into methanation. //// SNG production: Methanation takes place either within a fluidized bed reactor that has been developed specifically for the biomass-to-SNG process by PSI and CTU from Switzerland, or in existing fixed bed methanation technology. Depending on the concept, CO2 removal can take place prior, or downstream methanation step using, a.o., amine scrubbing. Further conditioning to bio-SNG includes at least a gas drying step.

Level of commercial application Demonstrated at pilot scale
Important pilots and EU projects Goteborg Energi (20 MW gas) to be started in 2014, Alkmaar (3 MW gas) to be started in 2017, Gussing pilot (1 MW gas)
Expected Developments Cheeper bio-SNG due to co-production of chemicals
Current Technology Readiness Level Level 7, Integrated pilot system demonstrated
Expected Technology Readiness Level in 2030 Level 9, System ready for full scale deployment
Justify expected Level in 2030 Further development on-going
References:
Drift, A. van der; R.W.R. Zwart; B.J. Vreugdenhil; L.P.J. Bleijendaal: Comparing the options to produce SNG from biomass. 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France


TECHNICAL PROPERTIES
Capacity of outputs (typical values)
Methane                      (m3/hour) 11850     LHV  (GJ / m3) 0.03667
Conversion efficiencies: net returns biofuels and biobased products(GJ/GJ biomass input) typical: 0.60 min: 0.60 max: 0.70   typical in 2020: 0.65 typical in 2030: 0.70  


Data sources used to define conversion efficiencies in 2014:
Drift, A. van der; R.W.R. Zwart; B.J. Vreugdenhil; L.P.J. Bleijendaal: Comparing the options to produce SNG from biomass. 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France
External inputs (not generated by the biomass in the conversion process)
Power     (kW): 2500

Indication: experience based data No

Number of possible full load hours per year (hours) 8500
Number of typical full load hours per year (hours) 8000
Typical Lifetime of Equipment (years) 40
Data sources used to define conversion efficiencies in 2020:
Drift, A. van der; R.W.R. Zwart; B.J. Vreugdenhil; L.P.J. Bleijendaal: Comparing the options to produce SNG from biomass. 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France
Data sources used to define conversion efficiencies in 2030:
Drift, A. van der; R.W.R. Zwart; B.J. Vreugdenhil; L.P.J. Bleijendaal: Comparing the options to produce SNG from biomass. 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France
General data sources for technical properties:
Drift, A. van der; R.W.R. Zwart; B.J. Vreugdenhil; L.P.J. Bleijendaal: Comparing the options to produce SNG from biomass. 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France

BIOMASS INPUT SPECIFICATIONS
Biomass input, common for the technology used:    Stemwood from thinnings originating from nonconifer trees, Stemwood from final fellings & thinnings;  Stemwood from thinnings originating from conifer trees, Stemwood from final fellings & thinnings;  Bark residues from pulp and paper industry, Secondary residues from pulp and paper industry;  Residues from further woodprocessing, Other wood processing industry residues;  Non hazardous post consumer wood, Post consumer wood;
Biomass input, technically possible but not common:           
           
Traded form Wood chips
Dimensions P31: 3,15 mm < P < 31,5 mm     Fine fraction F25: < 25 %

Moisture content (% wet basis) typical 15 max 25
Minimal bulk density (kg/m3, wet basis) 120
Maximum ash content (% dry basis) 3
Minimal ash melting point (= initial deformation temperature) (°C) 1000
Volatile matter (only for thermally trated material, torrefied or steam explosed) (VM%)

Maximum allowable contents
Nitrogen, N (wt%, dry) 1 Sulphur, S (wt%, dry) 0.1 Chlorine, Cl (wt%, dry) 0.05
Optional attributes
Net caloric value (MJ/kg) min max
Gross caloric value (MJ/kg) min max
Biogas yield (m3 gas/ton dry biomass) % methane
Cellulose content (g/kg dry matter) min max
Hemicellulose content (g/kg dry matter) min max
Lignin content (g/kg dry matter) min max
Crude fibre content (g/kg dry matter) min max
Starch content (g/kg dry matter) min max
Sugar content (g/kg dry matter) min max
Fat content (g/kg dry matter) min max
Protein content (g/kg dry matter) min max
Acetyl group content (g/kg dry matter) min max

FINANCIAL AND ECONOMIC PROPERTIES
Investments costs in 2014 (€): expected in 2020 (€): 280000000 expected in 2030 (€): 185000000
Labour needed Operators (FTE): 40 Staff and engineering (FTE):

Edited by: Hamid Mozaffarian, Tijs Lammens