Welcome to the Biomass conversion technologies database which you can access underneath! 

Through the underneath table users can access the database on lignocellulosic biomass conversion technologies characteristics (click on the number in last column). The data included in this database are feeding the Bio2Match, the BeWhere and the LocaGIStics tools all accessible via the main menu in this toolset under 'Tools'. accessible under the ‘Tool'  tab in the main menu above. In the process of creating the database it was ensured to take up the technologies relevant for producing the products described in the product market combinations in WP7 and that were the basis for assessing 2020 and 2030 biomass demand and consumption levels (see Tab 'General data' ---> 'Biomass demand'. For heat, power and fuels, several technologies are available in the database, while for other bio-based products (especially through the sugar platform) some but fewer conversion technologies are included. This is a representation of the technology readiness levels and the current and expected market situation for these products.

In the underneath table an overview is provided of all technologies included in the conversion technologies database. To access the detailed technology characterisation sheets in de database click on the technology number in the last column of the table.  To return to the overview table again click on the return arrow

The technologies covered can be classified in 6 main categories: treatment in subcritical water, syngas platform, gasification technologies, fast pyrolysis, direct combustion of solid biomass, chemical pretreatment, biochemical hydrolisis and fermentation and anearobic digestion. For a further description of the biomass conversion technologies database please consult D2.3The method developed in S2BIOM for minimal biomass quality requirement for each biomass conversion technology is described in D2.1 and  D2.2.

Conversion technologies Conversion technologies

Back

View details of Aqueous Phase Reforming

GENERAL PROPERTIES
Name Aqueous Phase Reforming
Main category Treatment in subcritical water
Subcategory Aqueous Phase Reforming
Image url http://www.virent.com/
Year of first implementation
Estimated number of systems in operation 5
Main operating principle:
Virent BioForming® technology features catalytic chemistry, which converts plant-based sugars into a full range of hydrocarbon products such as gasoline, diesel, jet fuel, and chemicals for plastics and fibers. The technology is feedstock flexible from conventional sugars as well as a wide variety of cellulosic biomass from non-food sources.

Level of commercial application Demonstration plant operational.
Important pilots and EU projects Eagle demonstration plant Wisconsin, USA
Expected Developments SHELL is building a plant at the Westhollow Technology Centrer, Houston
Current Technology Readiness Level Level 5, Laboratory testing integrated system
Expected Technology Readiness Level in 2030 Level 9, System ready for full scale deployment
Justify expected Level in 2030
References:
http://www.virent.com/



TECHNICAL PROPERTIES
Capacity of outputs (typical values)
Gasoline                      (liter/hour) 5.4     LHV  (GJ / m3) 33.6
Conversion efficiencies: net returns biofuels and biobased products(GJ/GJ biomass input) typical: 0.45 min: 0 max: 0.48   typical in 2020: typical in 2030:  


Data sources used to define conversion efficiencies in 2014:
Advanced Biofuels- GHG Emissions and Energy Balances, IEA Task 39, Report T39-T5, 25 May 2013

External inputs (not generated by the biomass in the conversion process)
Power     (kW): 0.5
LPG     (kg/hr): 1.5

Indication: experience based data No

Number of possible full load hours per year (hours) 8000
Number of typical full load hours per year (hours) 7000
Typical Lifetime of Equipment (years) 20
Data sources used to define conversion efficiencies in 2020:


Data sources used to define conversion efficiencies in 2030:


General data sources for technical properties:
Advanced Biofuels- GHG Emissions and Energy Balances, IEA Task 39, Report T39-T5, 25 May 2013


BIOMASS INPUT SPECIFICATIONS
Biomass input, common for the technology used:    Stemwood from thinnings originating from nonconifer trees, Stemwood from final fellings & thinnings;  Stemwood from thinnings originating from conifer trees, Stemwood from final fellings & thinnings;     
Biomass input, technically possible but not common:           
           
Traded form Wood chips
Dimensions P16S: 3,15 mm < P < 16 mm     Fine fraction F05: < 5 %

Moisture content (% wet basis) typical 10 max 60
Minimal bulk density (kg/m3, wet basis) 400
Maximum ash content (% dry basis) 1
Minimal ash melting point (= initial deformation temperature) (°C) 0
Volatile matter (only for thermally trated material, torrefied or steam explosed) (VM%)

Maximum allowable contents
Nitrogen, N (wt%, dry) 1 Sulphur, S (wt%, dry) Chlorine, Cl (wt%, dry) 0.1
Optional attributes
Net caloric value (MJ/kg) min max
Gross caloric value (MJ/kg) min max
Biogas yield (m3 gas/ton dry biomass) % methane
Cellulose content (g/kg dry matter) min max
Hemicellulose content (g/kg dry matter) min max
Lignin content (g/kg dry matter) min max
Crude fibre content (g/kg dry matter) min max
Starch content (g/kg dry matter) min max
Sugar content (g/kg dry matter) min max
Fat content (g/kg dry matter) min max
Protein content (g/kg dry matter) min max
Acetyl group content (g/kg dry matter) min max

FINANCIAL AND ECONOMIC PROPERTIES
Investments costs in 2014 (€): expected in 2020 (€): expected in 2030 (€):
Labour needed Operators (FTE): Staff and engineering (FTE):

Edited by: Rik te Raa, Tijs Lammens