Welcome to the Biomass conversion technologies database which you can access underneath! 

Through the underneath table users can access the database on lignocellulosic biomass conversion technologies characteristics (click on the number in last column). The data included in this database are feeding the Bio2Match, the BeWhere and the LocaGIStics tools all accessible via the main menu in this toolset under 'Tools'. accessible under the ‘Tool'  tab in the main menu above. In the process of creating the database it was ensured to take up the technologies relevant for producing the products described in the product market combinations in WP7 and that were the basis for assessing 2020 and 2030 biomass demand and consumption levels (see Tab 'General data' ---> 'Biomass demand'. For heat, power and fuels, several technologies are available in the database, while for other bio-based products (especially through the sugar platform) some but fewer conversion technologies are included. This is a representation of the technology readiness levels and the current and expected market situation for these products.

In the underneath table an overview is provided of all technologies included in the conversion technologies database. To access the detailed technology characterisation sheets in de database click on the technology number in the last column of the table.  To return to the overview table again click on the return arrow

The technologies covered can be classified in 6 main categories: treatment in subcritical water, syngas platform, gasification technologies, fast pyrolysis, direct combustion of solid biomass, chemical pretreatment, biochemical hydrolisis and fermentation and anearobic digestion. For a further description of the biomass conversion technologies database please consult D2.3The method developed in S2BIOM for minimal biomass quality requirement for each biomass conversion technology is described in D2.1 and  D2.2.

Conversion technologies Conversion technologies

Output capacity Common biomass input Technology readiness level Number
Fast pyrolysis Pyrolysis oil and diesel engine for electricity Pyrolysis combustion engine (compression-ignition) Power (0.25 MWe), Heat (0.25 MWth) Level 6, Prototype system verified 53
Syngas platform Fluidised bed gasification for FT-fuels production Syngas to FT-diesel Power (1.5 MWe), Heat (26 MWth), FT-diesel (16 m3/hour) Stemwood from thinnings originating from nonconifer trees, Stemwood from thinnings originating from conifer trees, Bark residues from pulp and paper industry, Residues from further woodprocessing, Non hazardous post consumer wood Level 7, Integrated pilot system demonstrated 52
Syngas platform Indirect gasification for SNG production Producer gas to biomethane Methane (11850 m3/hour) Stemwood from thinnings originating from nonconifer trees, Stemwood from thinnings originating from conifer trees, Bark residues from pulp and paper industry, Residues from further woodprocessing, Non hazardous post consumer wood Level 7, Integrated pilot system demonstrated 44
Syngas platform Fluidised bed gasification for methanol production Syngas to methanol Heat (45 MWth), Methanol (41.8 m3/hour) Stemwood from thinnings originating from nonconifer trees, Stemwood from thinnings originating from conifer trees, Bark residues from pulp and paper industry, Residues from further woodprocessing, Non hazardous post consumer wood Level 7, Integrated pilot system demonstrated 41
Fast pyrolysis Pyrolysis and hydrogenation for diesel fuel Pyrolysis oil diesel Pyrolysis diesel (23.6 m3/hour) Stemwood from thinnings originating from nonconifer trees, Stemwood from thinnings originating from conifer trees, Sawdust from sawmills from conifers, Sawmill residues: excluding sawdust, conifers, Residues from further woodprocessing Level 4, Laboratory testing protoype component or process 40